ifname-in-sid=called-sid|calling-sid|both
Specifies that interface name should be present in Called-Station-ID or in Calling-Station-ID or in both attributes.

Hi Wesley , do you want to see all sessions, or this fit for you accel-cmd pppoe interface show

use calling-sid instead of calling-station-id

I want to know which user is connected in a vlan 34 for example

it’s the same, but different names in RADIUS dict and accel-cmd

so , you need to set ifname-in-sid option in conf file, then you can match sessions by calling-sid/called-sid

I'll try that

accel-cmd reload works on that case?

As I remember for a new sessions

ok

thanks guys

it worked

Привет, а есть тут специалитьі cisco?

@TomakSI привет, зачем вопросы издалека)

nexus 3k vpc портченал, падает один порт с ошибкой

Eth1/48       1       eth  trunk  down    Internal-Fail errDisable   auto(D) 2

2020 Aug 18 14:14:12 M.CoreVPC.2 %ETHPORT-5-IF_ADMIN_UP: Interface Ethernet1/45 is admin up .
2020 Aug 18 14:14:14 M.CoreVPC.2 %ETHPORT-5-SPEED: Interface Ethernet1/45, operational speed changed to 1 Gbps
2020 Aug 18 14:14:14 M.CoreVPC.2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/45, operational duplex mode changed to Full
2020 Aug 18 14:14:14 M.CoreVPC.2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/45, operational Receive Flow Control state changed to off
2020 Aug 18 14:14:14 M.CoreVPC.2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/45, operational Transmit Flow Control state changed to off
2020 Aug 18 14:14:14 M.CoreVPC.2 %ETHPORT-5-IF_UP: Interface Ethernet1/45 is up in mode trunk
2020 Aug 18 14:14:22 M.CoreVPC.2 %ETHPORT-5-IF_DOWN_CHANNEL_MEMBERSHIP_UPDATE_IN_PROGRESS: Interface Ethernet1/45 is down (Channel membership update in progress)
2020 Aug 18 14:14:24 M.CoreVPC.2 %ETHPORT-5-SPEED: Interface Ethernet1/45, operational speed changed to 1 Gbps
2020 Aug 18 14:14:24 M.CoreVPC.2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/45, operational duplex mode changed to Full
2020 Aug 18 14:14:24 M.CoreVPC.2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/45, operational Receive Flow Control state changed to off
2020 Aug 18 14:14:24 M.CoreVPC.2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/45, operational Transmit Flow Control state changed to off
2020 Aug 18 14:14:27 M.CoreVPC.2 %ETHPORT-5-IF_SEQ_ERROR: Error ("internal fsm error") communicating with MTS_SAP_ETH_PORT_CHANNEL_MGR for opcode MTS_OPC_ETHPM_PORT_BRINGUP (R
ID_PORT: Ethernet1/45)
2020 Aug 18 14:14:27 M.CoreVPC.2 %ETHPORT-5-IF_DOWN_ERROR_DISABLED: Interface Ethernet1/45 is down (Error disabled. Reason:internal fsm error)

сам порт

Software
 BIOS: version 4.5.0
 NXOS: version 7.0(3)I7(8)

@casper_zxc1333hat0r ты там активничаешь, давай мнение, ты же сертифицированный специалист =)