Nozzle Torque Wrench better Design
This is a part remix and redesigned from https://www.thingiverse.com/thing:4332963
Because it did not meet the design requirements I wanted...I redesigned a better and more beautiful model.
It is much more efficient to handle, the lid is designed with threaded for a perfect fit and stable so as not to fall
To the bottom you need a 8mmD x 2mm thick neodymium magnet
The turbine propellers are 1.2mm thickness and provide a torque of 1.8 - 2 Nm
UPDATE: 11/02/2021
I have added 10 more models of handles in which you can adapt 2 different diameters D8mm and D5mm for more thicknesses of your choice.
The handles with 8x3-3 and 8x4-3 you can be used neodymium magnet with hole for M3 flat head screw + M3 hex nut
NOTE: D5mm magnets should be glued to prevent them from slipping through the hexagonal hole of the turbine
1.Nozzle Torque Wrench handle D5x1 thick
2.Nozzle Torque Wrench handle D5x1.5 thick
3.Nozzle Torque Wrench handle D5x2 thick
4.Nozzle Torque Wrench handle D5x2.5 thick
5.Nozzle…