Покупай умнее, живи веселее! Aliexpress.com

WORK STILL IN PROGRESS. At this stage I make no promises it will work.
REQUIRES the 4-wheel X carriage!  The mounting plate will not match the stock plate!
This is a remix of eschmidt12's "BMG-X2 Chimera Creality Ender 5 Extruder Mount" remixed to fit a Left and Right BMG geared extruder and 2 Phaetus Dragon hotends (Im guessing the V6 will also work since they blatantly copied much of the V6).
The original is here :https://www.thingiverse.com/thing:4534090/files
This tool cooling shroud seems to work :https://www.thingiverse.com/thing:2089094
First print went pretty well.  For a while.  Then my SKR 1.3 proved it cant keep a stable temp on both hotends it seems.  I did pid tuning but the second extruder is all over the map.  Going to add a capacitor to the 5v rail and swap thermistors to see if that solves it.  My switch out the MOSFET driving the second heater as well.
Nozzle alignment is tricky.  I need to come up with some way of making them +/- .001mm of one another.  A servo will probably be introduced…

The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity.