I’m using a simple push button in my schematic, mapped to the SW_PUSH_6mm footprint in the standard Buttons_Switches_THT library.  In the schematic, it has two pins, 1 & 2. The footprint has 4 pins, two pin1’s and two pin2’s. Internally, within the physical component, the two pin1’s are connected, as are the two pin2’s.  When I go to design the PCB, Pcbnew puts a ratsnest wire between the two pins, and expects them to be connected to a trace on the PCB. I only want to connect to one of the two i...